RC Product Designs presents:

TC3 "O"  V2 & V3

The latest conversion kit is intended to transform your Associated TC3 touring car into a high performance competition 1/10 scale electric 4WD off-road buggy. The conversion kit replaces most stock components of your TC3 with components that are a direct replacement of your stock parts. Slight modifications to the chassis will be required.  Complete assembly of the buggy will require all the included parts of this kit, your donor car and your set of shocks and tires.  

TC3"O" V2 Conversion Kit Content:  

	Carbon Fiber Front and Rear Shock Towers
	Lightweight Delrin Shock Tower Mounts
	Nylon Reinforced Chassis Kick-up Extension Plate
	Carbon Fiber Chassis Brace
	Slipper System
	Servo Saver Kit (Steering Bell-Crank Kit)
	Brass Steering Posts and Black Delrin Spacer
	Aluminum Steering Tie Bar
	Aluminum Steering Knuckle Extensions
	Black Delrin Servo Mounts
	Black Delrin Front and Rear A-Arms
	Modified Front and Rear Arm Mounts (Pivot Blocks)
	Steel Inner Hinge Pins (1/8" diameter)
	MIP CVD™ Bones (Set of 4)
	Black  Delrin Wheel Hex Adapters
	Set of Front and Rear White Dish Wheels
	Body Mounts
	Wing Mount Kit
	New V2 Lexan Body (with window mask) and Wing
	Additional screws, nuts and washers
	Decal Sheet
	Instruction Manual & Setup Sheet

Additional spare parts can be purchased separately in the Parts Page.

Other Kit Options are Available in the Kits/Parts Page

Download Instruction Manual and Setup Sheet here. You will need Acrobat Reader to see the instruction manual and setup sheet. If you do not have the reader, you can get the latest free reader using this link below. 

 

	Instruction Manual for TC3 "O" V2 (Rev 3.1) (PDF File)
	Setup Sheet for TC3"O" V2 (PDF File)
	Setup Sheet for TC3"O" V2 (Excel File)

Things you need to retain from your original Associated TC3 touring car to use with your new kit:

	Chassis
	Battery Bar and Clips
	Front Differential, Bearings and Transmission Case (Steel Outdrives Recommended)
	Front Input Shafts with all the hardware
	Rear Differential, Bearings and Transmission Case (Steel Outdrives Recommended)
	Drive shaft
	Rear Bumper
	Front and Rear Outer A-Arm Hinge Pins
	Front and Rear Axles (less CVD bones)
	All Bearings
	Front Block Carriers
	Rear Hub Carriers
	Steering Knuckles
	All Ball Studs and Ball Cups
	Motor Cam and screws
	Motor Clamp and screws
	Steering Servo Horn
	Servo Offset Spacers
	Rear Chassis Braces
	Antenna Tube and Cap

Additional Standard parts required for the kit:

	Associated Front and Rear B4 Buggy Shocks Preferred (other suitable buggy  shocks will work also)
	Turnbuckle Set

These items are available for purchase on the parts page, if needed.

Other optional components that will work with the kit:

	Depending on type of track, add an Associated Heavy Duty Front One-way unit
	Also optional parts that are compatible with the kit are the Associated 2 degree and 4 degree front block carriers to give you different steering characteristics

RC Product Designs LLC

All rights reserved.

This page was last updated on Monday, March 17, 2008

 Made in U.S.A.

tc3o tc3"o" tc3 "O" "RC Racing" "Washtenaw RC Raceway" machining "custom machining" "RC Car" "RC Truck" "RC Buggy" "Radio Controlled" "Radio Controlled car" "Radio Controlled truck" "RC Cars" "RC Trucks" "RC Buggies" "Radio Controlled cars" "Radio Controlled trucks" "custom RC Cars" "custom RC Trucks" "Radio Controlled Boat" "RC Boat" "RC Boats" "Radio Controlled Boats" tc3o tc3"o" tc3 "O" "RC Racing" "Washtenaw RC Raceway" machining "custom machining" "RC Car" "RC Truck" "RC Buggy" "Radio Controlled" "Radio Controlled car" "Radio Controlled truck" "RC Cars" "RC Trucks" "RC Buggies" "Radio Controlled cars" "Radio Controlled trucks" "custom RC Cars" "custom RC Trucks" "Radio Controlled Boat" "RC Boat" "RC Boats" "Radio Controlled Boats" tc3o tc3"o" tc3 "O" "RC Racing" "Washtenaw RC Raceway" machining "custom machining" "RC Car" "RC Truck" "RC Buggy" "Radio Controlled" "Radio Controlled car" "Radio Controlled truck" "RC Cars" "RC Trucks" "RC Buggies" "Radio Controlled cars" "Radio Controlled trucks" "custom RC Cars" "custom RC Trucks" "Radio Controlled Boat" "RC Boat" "RC Boats" "Radio Controlled Boats" tc3o tc3"o" tc3 "O" "RC Racing" "Washtenaw RC Raceway" machining "custom machining" "RC Car" "RC Truck" "RC Buggy" "Radio Controlled" "Radio Controlled car" "Radio Controlled truck" "RC Cars" "RC Trucks" "RC Buggies" "Radio Controlled cars" "Radio Controlled trucks" "custom RC Cars" "custom RC Trucks" "Radio Controlled Boat" "RC Boat" "RC Boats" "Radio Controlled Boats" tc3o tc3"o" tc3 "O" "RC Racing" "Washtenaw RC Raceway" machining "custom machining" "RC Car" "RC Truck" "RC Buggy" "Radio Controlled" "Radio Controlled car" "Radio Controlled truck" "RC Cars" "RC Trucks" "RC Buggies" "Radio Controlled cars" "Radio Controlled trucks" "custom RC Cars" "custom RC Trucks" "Radio Controlled Boat" "RC Boat" "RC Boats" "Radio Controlled Boats"tc3o tc3"o" tc3 "O" "RC Racing" "Washtenaw RC Raceway" machining "custom machining" "RC Car" "RC Truck" "RC Buggy" "Radio Controlled" "Radio Controlled car" "Radio Controlled truck" "RC Cars" "RC Trucks" "RC Buggies" "Radio Controlled cars" "Radio Controlled trucks" "custom RC Cars" "custom RC Trucks" "Radio Controlled Boat" "RC Boat" "RC Boats" "Radio Controlled Boats"tc3o tc3"o" tc3 "O" "RC Racing" "Washtenaw RC Raceway" machining "custom machining" "RC Car" "RC Truck" "RC Buggy" "Radio Controlled" "Radio Controlled car" "Radio Controlled truck" "RC Cars" "RC Trucks" "RC Buggies" "Radio Controlled cars" "Radio Controlled trucks" "custom RC